|
 |
|
|
 |
|
|
Fargo Overlaminates
When the protection of the dye-sublimation ribbon overlay (O) is not enough, a Fargo laminating printer/encoder can automatically transfer PolyGuard or Thermal Transfer Overlaminate onto cards after printing.
Fargo Standard Overlaminates
Thermal Transfer Overlaminate
- Thin material, approximately 0.25 mil thick
- Low to moderate card protection suitable for cards subjected to a low amount of abrasion and little contact with vinyl items
- Applied rapidly, in about 15 to 20 seconds
- Covers entire card surface — edge-to-edge
- Low to moderate cost
- Each overlaminate roll contains laminate for 500 cards
PolyGuard Overlaminate
- Thick material, either 0.6 mil or 1.0 mil thick
- Maximum card protection ensures long card life for cards subjected to wear factors such as repeated swipes through a magnetic stripe reader
- Applied in about 20 to 40 seconds
- Not edge-to-edge. PolyGuard leaves a margin of about 0.060" (3mm) around the edge of the card
| Part Number |
Description |
| 81780 |
Thermal Transfer Clear Overlaminate (500 prints) |
| 81783 |
Polyguard Clear Overlaminate - 0.6 Mil (250 prints) |
| 81784 |
Polyguard Clear Overlaminate - 1.0 Mil (125 prints) |
| 81789 |
Polyguard Clear Overlaminate - 1.0 Mil (250 prints) |
| 82222 |
Polyguard Hologram Overlaminate with World Globe Design - 0.6 Mil (250 prints) |
| 82224 |
Polyguard Hologram Overlaminate with World Globe Design - 1.0 Mil (250 prints) |
| 82226 |
Thermal Transfer Hologram Overlaminte with World Globe Design (500 prints) |
*Click Here to Request a Quote on Fargo Overlaminate Ribbons. Please reference the part number and quantity.
|
|
|
|
|
